19 inch Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails 16

The AtlasIED 316-12 is a stand-alone wall-mount equipment cabinet designed around a 19-inch-wide opening. It provides 16RU of rack space, adjustable rails, and a 12-inch usable center-section depth. Its overall dimensions are 34 inches high, 20 5/8 inches wide, and 18 1/2 inches deep. These documented measurements make it possible to evaluate rack capacity, equipment depth, wall space, and installation clearance before ordering.

Ideal Use Cases

This model is intended for installations that require 16RU of equipment capacity in a wall-mounted cabinet format. The adjustable rails support integration where rail positioning must be aligned with the installed equipment. Its 12-inch usable depth is particularly important when selecting components: installers can compare the depth of each planned device, including any necessary cable or connector clearance, against the available center-section depth.

The cabinet is also appropriate when a project calls specifically for a 19-inch-wide opening while allowing an overall cabinet width of 20 5/8 inches. Its 34-inch height and 18 1/2-inch overall depth should be considered when planning the wall location and the surrounding working area.

Why Choose This Model

The 316-12 brings its essential configuration details together in one clearly defined enclosure: 16 rack units, adjustable rails, and 12 inches of usable depth. This makes the model straightforward to assess against an equipment schedule. Rather than relying only on the nominal rack opening, buyers can account for both the usable center-section depth and the cabinet’s full exterior dimensions.

AtlasIED specifies a warranty period of 60 months from the date of purchase. The listed shipping weight is 80.00 pounds, or 36.29 kilograms, which gives installers and purchasers a concrete figure for delivery and handling planning.

Installation and Integration

Before installation, verify that the intended equipment fits within the cabinet’s 16RU capacity and 12-inch usable depth. Equipment dimensions should be checked together with the space required by attached connectors and cables. The adjustable rails can then be positioned as required for the planned rack arrangement.

Allow for the complete external size of the enclosure rather than planning from the 19-inch opening alone. The cabinet occupies 34 inches vertically, 20 5/8 inches horizontally, and 18 1/2 inches from front to back. The source data identifies the unit as a stand-alone wall-mount equipment cabinet, but it does not specify mounting hardware, wall construction requirements, or included accessories. Those installation details should therefore be confirmed for the intended site before work begins.

The stated 80.00-pound figure is the shipping weight, not an identified installed or empty cabinet weight. Handling arrangements should use the documented shipping value while any wall-load calculations should rely on separately confirmed installation data.

Performance Highlights

The primary capacity figure is 16RU, providing a defined amount of vertical rack space. Adjustable rails add positioning flexibility within that capacity, while the 12-inch center-section depth establishes the usable depth limit reported for installed equipment. The overall 18 1/2-inch cabinet depth is distinct from the usable center-section measurement, so both figures should be retained during design review.

Metric equivalents are supplied for the cabinet’s external dimensions: 86.36 centimeters high, 52.39 centimeters wide, and 46.99 centimeters deep. The shipping weight is likewise documented in both measurement systems at 80.00 pounds and 36.29 kilograms.

What Makes It Different

This model’s defining combination is a 19-inch-wide opening, 16RU rack capacity, adjustable rails, and a 12-inch usable center section. The product data separates usable depth from overall depth, helping prevent the exterior measurement of 18 1/2 inches from being mistaken for equipment clearance. That distinction is valuable when comparing the cabinet with the actual depth requirements of the components selected for the rack.

The 316-12 designation also communicates the specific model being evaluated, while the published measurements and 60-month warranty provide concrete purchasing criteria without depending on unspecified cabinet features.

Final Assessment

The AtlasIED 316-12 is a focused choice for a wall-mounted installation requiring 16RU, adjustable rack rails, and 12 inches of usable depth. Its clearly stated exterior measurements support accurate space planning, and its documented shipping weight supports delivery preparation. Confirm equipment depth, connector clearance, mounting requirements, and any needed accessories for the installation, then use the 60-month warranty period as part of the final purchasing assessment.